Paint tips

Creative Crown can be painted very simple

Just a few tips and rules to follow

Never use lacquer based paints or lacquer thinners.

Never paint with spray can enamels.

When in doubt test a scrap part and allow a few hours for results.

The best way to paint Creative Crown

It is best to paint is with water based paints.

Water based latex and enamels work good.

You can brush or spray paint. You can thin with water.

You can cover with 1 good coat of primer and 1 good finish coat.

Its easier to prime and finish coat all parts before gluing to walls and corners.

The best way to glue Creative Crown

To glue Creative Crown to your walls use

Great adhesive for interior and wet location installation. Can be painted in 2 hours	ALL NEW THE BESTADHESIVE Creative Crown Modified Polyurethane Adhesive Strong and Fast bonding. Adheres to most surfaces: Painted walls, sheetrock, brick, glass, tile, foam, marble, wood, granite, stucco, steel, vinyl,sheet metal aluminum, plastics and concrete. No Solvents - Very low VOC's
	Power Grab by Loctite Foamboard Light to medium bonding Dry's in about 1-1/2 hours Only good for interior sheetrock and painted surfaces
	Power Grab by Loctite Construction Light to medium bonding Dry's in about 1-1/2 hours Only good for interior sheetrock and painted surfaces
	Apply a pencil sized zig zag bead across the back of the molding and apply to the wall. Press to the wall with the flat palm of your hand. No Solvents - Very low VOC's Install Power Grab the same way